``` Sand To You

```

To find out approximately how many tonnes of sand, gravel or topsoil you might need to complete a job please use the below volume calculator. If you have the length, width and depth of the area you are trying to cover you can calculate approximately how much of the material you will. The length and width should be in feet and the depth in inches (usually you are not going very deep). If you are going quite deep then please convert to inches. 12 inches = 1 foot.     Seven inches is 7/12 feet which equals 0.58 feet. So if going 2 feet 7 inches deep it would be typed in as 24.58 inches for the depth.

Sand To You is not responsible for an inaccurate or wrong estimate for the number of tonnes or amount of cubic yards required by the below calculations. The calculations are approximately how much material you might require.

To calculate the approximate amount of tonnes of birdseye (pea gravel) you need please fill out the below:

Length of area in feet: feet    Width feet    Depth inches

To calculate the approximate amount of tonnes of three quarter inch clear crush (gravel) you need please fill out the below:

Length of area in feet: feet    Width: feet    Depth: inches

To calculate the approximate amount of tonnes of three quarter inch road base you need please fill out the below:

Length of area in feet: feet    Width: feet    Depth: inches

To calculate the approximate amount of tonnes of sand you need please fill out the below:

Length of area in feet: feet    Width: feet    Depth: inches

To calculate the approximate amount of cubic yards of topsoil you need please fill out the below:

Length of area in feet: feet    Width: feet    Depth: inches

Again, Sand To You is not responsible for an inaccurate or wrong estimate of the number of tonnes or amount of cubic yards required by the above calculations.